General Purpose Water Baths
Electron Microscopy Sciences EMS MyBath™ Water Bath, 12L, 230 V, Ambient +5 to 100°C temp range
MyBath is designed to guarantee superior accuracy and performance in a compact footprint. MyBath models feature seamless, stainless steel chambers for easy cleaning and long life. The chambers resist rust and have no corners to collect dirt or contamination.
Adjustable in 0.1 degree C increments, the temperature is shown on a large, 3-digit display. The Quik-CAL allows for simple, in-lab calibration. High efficiency insulation maintains temperature stability and uniformity within the bath, while keeping the housing cool to the touch. Easy to use controls to digitally select and monitor settings. Drains for water changes.
Temp range: Ambient +5 to 100°C
Accuracy: ± 0.5°C at 37°C
Increment: 0.1°C
Uniformity: ± 0.2°C at 37°C
Chamber: 12.8 (W) x 10.4 (D) x 7.9 (H)"
Electron Microscopy Sciences Digital Dry Bath
Thermally control samples during use with Digital Dry Bath. Utilizes all CoolSafe system chambers. Temperatures can be controlled from 5 degree above ambient to 100 degree C in 1 degree increments to allow for stable operation. Aluminum block evenly transfer heat to tubes for uniform heat transfer. Each unit comes with a block lifter to safely remove hot chambers for easy removal.
Electron Microscopy Sciences EMS MyBath™ Water Bath, 4L, 230 V, Ambient +5 to 100°C Range
MyBath is designed to guarantee superior accuracy and performance in a compact footprint. MyBath models feature seamless, stainless steel chambers for easy cleaning and long life. The chambers resist rust and have no corners to collect dirt or contamination.
Adjustable in 0.1 degree C increments, the temperature is shown on a large, 3-digit display. The Quik-CAL allows for simple, in-lab calibration. High efficiency insulation maintains temperature stability and uniformity within the bath, while keeping the housing cool to the touch. Includes racks for 1.5/2.0, 15 & 50 ml tubes. Easy to digital controls to select and monitor settings.
Temp range: Ambient +5 to 100°C
Accuracy: ± 0.2°C at 37°C
Increment: 0.1°C
Uniformity: ± 0.2°C at 37°C
Chamber: 5.3 (W) x 9.4 (D) x 5.5 (H)"
Sigma Aldrich Fine Chemicals Biosciences MyBathTM mini water bath A1EA
Designed with the molecular biology lab in mind the MyBath(TM) mini water bath system is the complete personal water bath. This compact water bath features easy to use controls that allow the user to digitally select and monitor temperature.Its hinged lid provides a secure covered environment and can be flipped open (to the rear) or completely and instantly removed at the users option. It includes Quik-Cal(TM) in-lab user calibration function.Note the racks only comes with the 4L model
JDM LAB SOLUTIONS LLC Digital Mini Water Bath WB-01A
Microprocessor PID control with digital displayExcellent temperature uniformityOverheating alarm and automatic shut offDry run protection with audible alarm to avoid damage if the water level is too lowIndicator light illuminates when temperature >60°CVarious tube holders are available to order separately
Models WB-01A is available with a programmable feature.
Sigma Aldrich Fine Chemicals Biosciences JulaboR water baths PURA 11EA
The PURA water bath from JULABO sets new standards of performance with innovative technologies that leave conventional water baths behind. Users enjoy numerous benefits in their daily work. JULABO engineers prioritized innovative functionality a cutting-edge design and the use of completely novel technologies as early as the conceptualization phase of development. The results are nothing short of brilliant. A PURA water bath will streamline the daily routines in your laboratory with innovative functionality.All PURA water baths have an integrated drain tap. Enameled and glass-hard parts in the bath itself are highly durable and - most importantly - hygienically clean. Polycarbonate sidewalls have better insulating properties than stainless steel and are less conductive but are equal to stainless steel in terms of cleanliness and hygiene. Operating the water bath is very straightforward and the bright white LED display is easy to read even from a distance. USB data communication is
Ace Glass, Inc. Instatherm; oil bath, 160mL, 64mm ID, 70mm OD, 50mm height, 20v/5amp max, 12ft PTFE-clad, 2-prong, permanently attached controller cord, thermocouple/thermometer holding clip
Instatherm; oil bath, 160mL, 64mm ID, 70mm OD, 50mm height, 20v/5amp max, 12ft PTFE-clad, 2-prong, permanently attached controller cord, thermocouple/thermometer holding clip
Cole-Parmer Stuart Digital Water Bath, stainless steel, 6 L, 230 VAC
These utility baths feature a clear LED temperature display with an analog dial, making set point adjustments quick and ensuring accurate temperature control. Polycarbonate lid provides full view of bath contents and reduces heat loss. Low water level sensor prevents dry boiling, and overtemperature protection system monitors temperature and controls heater in the event of a fault.
Built-in drain empties stainless steel tank for water changes and maintenance. The heater is mounted beneath the tank, so it is not in the way.
Electron Microscopy Sciences EMS MyBath™ Water Bath, 8L, 230 V, Ambient +5 to 100°C temp range
MyBath is designed to guarantee superior accuracy and performance in a compact footprint. MyBath models feature seamless, stainless steel chambers for easy cleaning and long life. The chambers resist rust and have no corners to collect dirt or contamination.
Adjustable in 0.1 degree C increments, the temperature is shown on a large, 3-digit display. The Quik-CAL allows for simple, in-lab calibration. High efficiency insulation maintains temperature stability and uniformity within the bath, while keeping the housing cool to the touch. Easy to use controls to digitally select and monitor settings. Drains for water changes.
Temp range: Ambient +5 to 100°C
Accuracy: ± 0.5°C at 37°C
Increment: 0.1°C
Uniformity: ± 0.2°C at 37°C
Chamber: 12.8 (W) x 10.4 (D) x 5.9 (H)"
Research Products International Corp Utility Bath, 20""
Stainless steel laboratory products are efficiently designed for easy cleaning and quick sterilizing. Items will not chip, break, or corrode. All items are produced from heavy gauge stainless steel for added durability.
Being Scientific BWB-0505 - 5L/5L, Dual Chamber Water Bath, Temperature Range:Amb+5℃ - 99℃
BEING Scientific General Purpose Laboratory Water Baths provide users with a constant temperature environment that only can be obtained when samples are totally immersed in water. Our line of lab water baths come in a variety of sizes and are suitable for direct heating and auxiliary heating of biological, chemical, physical, plant, chemical, and other experimental samples. Ideal applications for each Being Water Bath include routine laboratory temperature control, E.Coli detection, sample thawing, bacterial detection, incubation microbial experiments, cell culture, and food testing pretreatment.
Electron Microscopy Sciences Digital Dry Bath with Cham-1000 and Lifter
Thermally control samples during use with Digital Dry Bath. Utilizes all CoolSafe system chambers. Temperatures can be controlled from 5 degree above ambient to 100 degree C in 1 degree increments to allow for stable operation. Aluminum block evenly transfer heat to tubes for uniform heat transfer. Each unit comes with a block lifter to safely remove hot chambers for easy removal.
MARSHALL SCIENTIFIC Polyscience WBE10A11B 10L Digital Water Bath
The Polyscience WBE10A11B 10L Digital Water Bath is designed to handle a wide range of laboratory procedures including incubation, inactivation and agglutination as well as most pharmaceutical, serological, biomedical and industrial procedures. To ensure optimum temperature uniformity, your Water Bath features an energy efficient, large-area heater and thermostatic control. Its PID microprocessor control (Proportional Integral Derivative) system provides proportional heat control by anticipating the approach to your set point temperature and preventing overshoot. A redundant safety thermostat is standard on all models.
Being Scientific BPC-05A - 4.5L, –20℃ to 150℃, 5L /min flow rate
The BEING BPC Series cooling/heating circulators provideconsistent, precise, and stable laboratory temperature controlfor cooling or heating through constantly circulating water. It canbe used for supplying auxiliary heating for water baths. They arewidely used in various applications like dissolution testing, andsample and reagent heating in colleges, industrial and miningenterprises, and scientifi c research departments.
Sigma Aldrich Fine Chemicals Biosciences MyBlockTM mini dry bath bl1EA
To fit MyBlock mini dry bath/block heater.